Floating ball valve means that its ball valve is floating, the ball can produce a certain displacement and press on the sealing surface of the outlet end under the medium pressure to ensure that the outlet end is sealed. Shanghai Power Station Valve Factory Co., Ltd. has been established for many years, who kept developing and producing floating ball valves, and it has also been painstakingly working hard to make floating ball valves, just to provide customers the best product experience.

The main structural characteristics of the floating ball valve produced by Shanghai Power Station Valve Factory:

●2-Piece Body Construction:The valve body adopts silica sol precision casting of 2 pieces design, simple structure, high material structure density, smooth and beautiful appearance.

● Double seal design: the seal between the two sections of the valve body, the seal between the ball and the valve seat, and the seal between the stem and the valve body all adopt a double sealing structure to ensure the sealing reliability of the valve.

● Anti-blowout Stem Design: the bottom of the stem adopts a blow-proof shoulder design, and there will be no stem blowing accident when the medium pressure acts.

● Firesafe Design Construction: each sealing part of the valve is designed with fireproof steps, and when the soft sealing ring is burned in the event of a fire, the fireproof steps of each sealing part specially designed for fire prevention can play an emergency sealing role.

● Anti-Static Design Construction: an electrostatic exit device is provided between the ball and the valve stem and between the stem and the valve body to eliminate the accumulation of static electricity.

● Locking Design Construction: a 90° switch perforated positioning plate is set in the valve operation part, which can be locked as needed in the fully open and fully closed positions to prevent misoperation and ensure the safe operation of the system.

●Operation Mode: Lever, Electric Actuator, and Pneumatic Actuator design acc. to customer’s requirement.

Floating Ball Valve Series SDFQ41F-16/100, nominal pressure PN1.6Mpa-6.4Mpa, Nominal Diameter DN15mm~300mm, Main Material: Carbon Steel, Stainless Steel, Alloy Steel, and also main material can designed acc. to the actual working medium. Because of its simple structure, good sealing performance, small flow resistance, compact size and other advantages, it has been widely used in electric power, oil and gas, chemical industry and other industrial fields. The ball valve is suitable for water, oil, oil and gas and some corrosive media.

Picture/Catoon/Video was taken by Film&TV depart. of PRC Media.

Catalogue was produced by plan&design depart. of PRC Media.