Craftsmen are skilled in their hearts, professions, and diligence
Category
control valve
1, improve the heating conditions: Where the use of manual control valve branch line and heat points, can be designed according to the conditions of flow regulation, to achieve a good temperature conditions, this control valve than the gate valve, globe valve regulating performance is good, it has an approximate straight-line regulation performance, therefore, the heating building cold and hot uneven phenomenon has been a powerful improvement.
2, energy saving: heat pipe network due to temperature and pressure imbalance, resulting in some of the tributary flow is too large, so that some building temperature is too high, the user has to open the window, a large amount of heat energy wasted, due to the installation of a branch of the manual regulating valve, to overcome the temperature and pressure imbalance, to avoid opening the window, to achieve the purpose of saving energy.
3, to improve the hydraulic conditions of the network: manual control valves can be controlled in accordance with the rated flow rate, the network overruns the flow rate reduction, so that the original degree of deterioration of the water conditions have been improved to a certain extent.
Regulating valves
Size: /
Pressure: PN16~PN420
Diameter: DN15~DN400
Control valves
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Control valves
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Control valves
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
control valves
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
control valve
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Control valve
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Control valve
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Control valve
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Control valve
Size: /
Pressure: PN16~PN420
Diameter: DN50~DN4000
Motorized Control Valve
Size: /
Pressure: /
Electric control valve is an important executive unit instrument in industrial automation process control. With the increasing degree of automation in the industrial field, it is being used more and more in various industrial production areas. Compared with the traditional pneumatic control valves have obvious advantages: electric control valves energy saving (only in the work of electrical energy consumption), environmental protection (no carbon emissions), quick and easy to install (without the need for complex pneumatic piping and air pump workstations). Valve according to its matching actuator using the power, according to its function and characteristics are divided into linear characteristics, equal percentage characteristics and parabolic characteristics of the three.
Pneumatic low temperature adjustment valve
Pressure: PN0.6~1.6
Material: carbon steel stainless steel
Standard: GB
pressure reducing valve
Size: /
Pressure: /
Material: /
Pneumatic sanitary control valve
Size: /
Pressure: /
Material: /